lihlahisoa

Mojule oa taolo o kenyelletsa molaoli le rack ea CPCI e nang le slot e le 'ngoe kapa tse peli, bonyane. Sebaka se ka ho le letšehali se tlameha ho ba le molaoli oa sehlooho (slot 1). Rake e le 'ngoe e ka tšoara molaoli oa bobeli, oa boraro le oa bone. Ho eketsa nako ea bophelo ba betri ha e ntse e bolokoa, betri ea CMOS e huloa ka jumper ea boto ea processor. jumper ea betri e hloka ho kenngoa hape pele e kenya boto. Bakeng sa boemo ba li-jumpers, sheba moralo oa mojule oa UCCx o amehang. Letsatsi la ka hare le oache ea nako ea sebele, hammoho le litlhophiso tsa CMOS RAM, kaofela li tsamaisoa ke betri. Kaha li-setting tsa CMOS li behiloe ho litekanyetso tsa tsona tse nepahetseng tsa kamehla ke BIOS, ha ho na lebaka la ho li fetola. Oache ea nako ea 'nete feela e hloka ho hlophisoa bocha. Ka ho sebelisa lenaneo la ToolboxST kapa seva sa NTP ea sistimi, nako ea pele le letsatsi li ka hlophisoa.

Haeba boto e le boto ea tsamaiso (slot 1 board) 'me ho na le mapolanka a mang ka har'a rack, mapolanka a mang a tla khaotsa ho sebetsa haeba boto ea tsamaiso e tlosoa. Ha u nkela boto leha e le efe ka har'a rack, ho eletsoa hore matla a tima. O ka felisa matla a rack ho sebelisa e 'ngoe ea mekhoa e latelang.

• Ho na le sesebelisoa se ka sebelisoang ho tima phepelo ea motlakase sebakeng se le seng sa phepelo ea motlakase.

• Ho tima motlakase ka sesebelisoa sa phepelo ea matla a mabeli, phepelo ea motlakase ka bobeli e ka tlosoa ntle le kotsi.

• Hlakola likhokahanyo tsa Mate-N-Lok tse tlase sebakeng sa CPCI se sebelisetsoang ho kenya matla a mangata.

UCCC module e na le li-injection / ejector ka tlase le holimo, ho fapana le liboto tsa Mark VI VME tse neng li fana ka li-ejectors feela. Ejector e ka holimo e lokela ho sekamela holimo, 'me ejector e ka tlase e lokela ho sekamela tlase, pele e thellela boto ka har'a raka. Li-injection li lokela ho sebelisoa ho kenya boto ka botlalo hang ha sehokelo se ka morao sa boto se kopane le sehokelo sa backplane. Ho etsa sena, hula ejector e tlase ha u ntse u tobetsa ente e holimo. U se ke ua lebala ho tiisa li-screws tse ka holimo le tse ka tlaase tsa enjector/ejector ho qeta ho kenya. Sena se fana ka khokahano ea chassis fatše le ts'ireletso ea mochini.

Opereishene:

Molaoli o na le software e etselitsoeng tšebeliso ea eona, joalo ka lihlahisoa tsa balance-of-plant (BOP), land-marine aero derivatives (LM), mouoane le khase, har'a tse ling. E ka tsamaisa li-blocks kapa li-rungs. Lipakete tsa I/O le lioache tsa balaoli li hokahantsoe le li-microseconds tse 100 ho sebelisoa maemo a IEEE 1588 ka R, S, le T IONets. Holim'a R, S, le T IONets, data ea kantle e romelloa le ho amoheloa ho tsoa polokelong ea tsamaiso ea taolo ea molaoli.

DUAL SYSTEM:

1. Tšoara lintho tse kenang le tse hlahisoang bakeng sa lipakete tsa I/O.

2. Litekanyetso tsa boemo ba ka hare le data ea ho qala ho tsoa ho molaoli ea khethiloeng

3. Tlhahisoleseding ea ho hokahanya le boemo ba balaoli ka bobeli.

TRIPLE MODULAR REDUNDANT SYSTEM:

1. Tšoara lintho tse kenang le tse hlahisoang bakeng sa lipakete tsa I/O.

2. Liphetoho tsa boemo ba ho vouta ka hare, hammoho le data ea ho lumellana ho tsoa ho e mong le e mong oa balaoli ba bararo.

3. Lintlha tse tsoang ho molaoli ea khethiloeng mabapi le ho qala.

TLHALOSO EA MOSEBETSI:

IS415UCCCH4A ke Single Slot Controller Board e entsoeng le e entsoeng ke General Electric e le karolo ea Mark VIe Series e sebelisoang ho Distributed Control Systems. Khoutu ea kopo e tsamaisoa ke lelapa la likhomphutha tse nang le boto e le 'ngoe, 6U high, CompactPCI (CPCI) tse bitsoang balaoli ba UCCC. Ka li-interfaces tsa marang-rang tsa I / O, molaoli o hokahana le lipakete tsa I / O ebe o hloella ka har'a sebaka se koaletsoeng sa CPCI. QNX Neutrino, OS ea nako ea sebele, e nang le mesebetsi e mengata e entsoeng bakeng sa lits'ebetso tsa indasteri tse hlokang lebelo le phahameng le botšepehi bo phahameng, e sebetsa e le tsamaiso ea tsamaiso (OS). Marang-rang a I/O ke litsamaiso tsa Ethernet tse ikemetseng, tse inehetseng tse tšehetsang feela balaoli le lipakete tsa I/O. Lihokelo tse latelang tsa opareitara, boenjiniere, le li-interface tsa I/O li fanoa ke likou tse hlano tsa puisano:

• Bakeng sa puisano le li-HMI le lisebelisoa tse ling tsa taolo, Unit Data Highway (UDH) e hloka khokahanyo ea Ethernet.
• R, S, le TI/O khokahano ea marang-rang ea Ethernet
• Ho theha khokahano ea RS-232C ka boema-kepe ba COM1